The use of advanced technologies in today’s electrical products has a negative impact on the quality of electrical power supplied to the consumers.  The root of the problem lies in the massive use of “switching power suppliers” in variety of electrical products such as LED-based lightning fixtures, computers, screens, printers, Industrial energy consumers such as variable-speed drive (VSDs) and more.
Switching power suppliers used in the industry, commercial buildings and private sector affects the quality of the power supply by creating harmonies and distortions on the electrical grid, resulting in large number of cases damage to the electrical grid, electrical panels and damage to the electrical products connected to the electrical grid.

In order to overcome this problem, we must use objective measuring tools so that we can measure and know the type of problem and the magnitude of the problem, which is a preliminary and necessary step in solving the problem.
IEC 61000-4-30 standard is designed to determine the accuracy and quality of the measurements done by the analyzer  (rate of measurements, method of measurements and accuracy) in order to get an objective measuring tool .

Control Applications Ltd. ElNet PQ tested and found to be suitable by an accredited laboratory (the American PSL) in this standard as a Class A certified electrical quality measurement analyzer.

The Utility companies have set relatively easy statistical standards to test the power quality, which relies heavily on average and statistical data this standard defined as the EN50160 standard and provided as part of the UniWeb software provided  by a Control Application Ltd. as a power quality monitoring software.

The best solution for EN50160 reports is the Elnet PQ:

http://www.elnet.cc/product/elnet-pq-2/

The post Analyzing the power quality / switcher power supplies causing harmonics appeared first on Elnet Power energy quality multichannel meters | EN50160 | Analyser.

Control Applications, which set a new high standard in precise electrical metering (1600 samples per cycle), has recently unveiled an advanced multi-meter which allows the monitoring of earth leakage current in an electric panel, alongside with all other standard measured parameters of voltage, current, frequency, power-factor ,energy harmonics etc., all accessible through a user-friendly menu, in high resolution color graphics.

Checking Leakage current is your best indication of safety check of your electric facility. A facility, in which a high leakage current was measured beyond what is permitted by regulations, requires a thorough inspection.

Using the ELNet LTP utilizing the power-meter function normally present in electric panel, it is possible to constantly monitor the leakage current in an electric panel, locating the source and magnitude of the leakage at relative ease.

Old version leakage current devices usually performed which all power lines involved are passing through big current transformer, which feature with inaccurate output (inaccuracy up to 15%). These old version leakage current detectors do not provide additional measurements as those mentioned above (V; I; P, PF etc.) and tend to be more expensive than the ELNet LTP solution which includes in it all measureable parameters, including earth leakage current.

Read more…

The post Monitoring and control Leakage Current with ELNet LTP Power-meter appeared first on Elnet Power energy quality multichannel meters | EN50160 | Analyser.

Bellow please find our new Certificate of Conformity –   IEC 61000-4-30 Ed. 2 (2008) Class A that related to power quality monitoring.

Models Elnet PQ and PQD

PSL 61000-4-30 CLASS A Certificate - Final - CNTL App » Post
PSL 61000-4-30 CLASS A Certificate - Final - CNTL_App.pdf

171.5 KiB
1261 Downloads
Details

Category:	CE Certificate
Date:	July 31, 2017

The post Class A – Elnet PQ appeared first on Elnet Power energy quality multichannel meters | EN50160 | Analyser.

Well, the Elnet VP is that meter.

It was designed to replace mechanical meters. It can be set up to display either Voltage or Current. The display can also alternate between Voltage and Current every 2 seconds.

More details at: http://www.elnet.cc/product/elnet-vp/

The post New model Elnet VP appeared first on Elnet Power energy quality multichannel meters | EN50160 | Analyser.

There for we have created a video about Elnet energy monitoring solutions.

You can take a look at:

You are welcome to comment, share and subscribe!

The post Elnet Power and Energy Quality meters mission video appeared first on Elnet Power energy quality multichannel meters | EN50160 | Analyser.

Our mission is to provide the best solutions in the field of measurements for our customers. Because of this we have launched the all new Elnet Online shop.

The Elnet Online shop offers all the latest Elnet electrical energy monitoring equipment at your mouse click.

As our gift for the launch phase, we have prepared a Special coupon: “ elnetlt30”

What does the Special coupon?

It offers a discount of -30% for the Elnet LT and Elnet LT TCP multimeters

How to use the coupon?

Insert the coupon in the cart, enter it in the Coupon code filed (marked with red dotted line) and hit the Appy Coupon button. Total amount should be corrected.

The coupon is valid till 30th September 2015 or till the stock lasts.

To your success!

The post Elnet LT and LT TCP/IP 30% off in the launch phase! appeared first on Elnet Power energy quality multichannel meters | EN50160 | Analyser.

The post Elnet PFC with new color screen appeared first on Elnet Power energy quality multichannel meters | EN50160 | Analyser.